The surface of the roller presses the "O" groove, and the transmission is realized through the "O" belt.
Plastic precision bearing components are used at the end, stable operation; simple structure, easy installation, anti-static;
There is a certain deformation in the grooving process of the roller, and the runout value is slightly larger than that of the non-groove roller.
| Conveying load | Single material≤30KG |
| Maximum speed | 0.5m/s |
| Temperature range | -5℃~40℃ |
| Bearing housing | Plastic & carbon steel components |
| Sealing end cap | Plastic components |
| Ball | Carbon steel |
| Roller surface | Steel/ Aluminum |
1011 Roller
| Tube Dia | Shaft dia（d） | G（Customized） | d1 |
| Φ48.6 | 11hex、Φ10/12 | 65 | Φ37.5 |
| Φ50 | 11hex、Φ8/10/12 | 65 | Φ38.5 |
| Φ60 | 11hex、Φ10/12 | 65 | Φ48.0 |
1012 Roller
| Tube Dia | Shaft dia（d） | G1（Customized） | G2 | d1 |
| Φ48.6 | 11hex、Φ10/12 | 35 | 30 | Φ37.5 |
| Φ50 | 11hex、Φ8/10/12 | 35 | 30 | Φ38.5 |
| Φ60 | 11hex、Φ10/12 | 35 | 30 | Φ48.0 |
|
Tube Dia |
Tube thickness |
Shaft Dia |
Maximum load |
Bracket width |
Locating step |
Shaft Length L |
Shaft Length L |
Material |
Selection of the sample |
||
|
D |
t |
d |
|
BF |
（Milling flat）E |
(Female thread) |
Spring pressure |
Steel galvanized |
Stainless Steel |
Aluminum |
OD 50mm Shaft dia 11mm |
|
|
|
|
|
|
|
|
|
|
|
|
Tube Length 600mm |
|
Φ48.6 |
1.5 |
11hex、 Φ10/12 |
120KG |
W+10 |
W+9 |
W+10 |
W+31 |
✓ |
✓ |
|
Steel double sided galvanized spring press fit |
|
Φ50 |
1.5 |
11hex、Φ8/10/12 |
120KG |
W+10 |
W+9 |
W+10 |
W+31 |
✓ |
✓ |
|
1011.50.11.600.A100 (Single grooved) |
|
Φ60 |
2.0 |
11hex、 Φ10 /12 |
160KG |
W+10 |
W+9 |
W+10 |
W+31 |
✓ |
✓ |
|
1012.50.11.600.A100 (Double grooved) |
Remarks: The position of the groove and the quantity can be customized; the Φ50 tube can be covered with 2mm soft rubber; the Φ50 tube can be added with a plastic taper sleeve, and the turning roller can be customized