The plastic-steel double-chain turning conveyor roller is suitable for conveying light and medium load materials.
1142 plastic-steel sprocket rollers are used, and plastic taper sleeves are installed to realize the turning function of plastic-steel sprockets.
PVC Cone Sleeve Roller, by adding a conical sleeve (PVC) to the conventional roller, various types of turning mixers can be made to realize curved conveying. Standard taper is 3.6°, special taper can not be customized.
Steel cone roll, non-standard size, wide temperature range, can be customized steel cone roll. 3.6° standard taper can be used, and other tapers can also be customized.
| Conveying load |
Single material≤100KG |
| Maximum speed |
0.5m/s |
| Temperature range |
-5°℃~40°c |
|
Bearing housing |
Plastic carbon steel components |
|
Sealing end cap |
Plastic components |
|
Call |
Carbon steel |
|
Roller surface |
Plastic |
|
Sprocket parameters |
|||
|
Sprocket |
a1 |
a2 |
a3 |
|
08B14T |
18 |
22 |
18.5 |
|
Taper Sleeve Parameter Table |
||
|
Taper Sleeve Length (WT) |
Taper Sleeve Diameter (D1) |
Taper Sleeve Diameter (D2) |
|
300 |
Φ56 |
Φ74.9 |
|
350 |
Φ52.9 |
Φ74.9 |
|
400 |
Φ56 |
Φ81.1 |
|
450 |
Φ52.9 |
Φ81.1 |
|
500 |
Φ56 |
Φ87.4 |
|
550 |
Φ52.9 |
Φ87.4 |
|
600 |
Φ56 |
Φ93.7 |
|
650 |
Φ52.9 |
Φ93.7 |
|
700 |
Φ56 |
Φ100 |
|
750 |
Φ52.9 |
Φ100 |
|
800 |
Φ56 |
Φ106.3 |
|
850 |
Φ52.9 |
Φ106.3 |
|
Tube Dia |
Tube thickness |
Shaft Dia |
Maximum load |
Bracket width |
Sprocket |
Shaft Length L |
Material |
Selection example |
Special requirements |
||
|
D |
t |
d |
|
BF |
|
(Female thread) |
Steel zincplated |
Stainless Steel |
Aluminum |
Outer diameter 50mm Shaft diameter 12mm |
Taper sleeve length 300mm |
|
|
|
|
|
|
|
|
AO |
B1 |
CO |
Roller surface length 400mm |
|
|
Φ50 |
1.5 |
Φ12/15 |
100KG |
W+64 |
08B14T |
W+64 |
✓ |
✓ |
✓ |
Stainless steel 201, female thread 1142C.50.12.400.B.10 |
|
Remarks: only for Φ50 tubes, can add plastic cone sleeves, custom turning rollers.