The transmission end is equipped with a plastic steel sprocket and internal friction kit, relying on friction to provide transmission torque;
When the conveyed object is obstructed, the surface of the roller and the conveyed object are stationary, which can reduce the wear and tear of the surface of the conveyed object;
The end sleeve adopts plastic precision bearing components for smooth running.
|
Conveying load |
Single Roller≤400KG |
|
Maximum speed |
0.5m/s |
|
Temperature range |
-20℃~80C |
| Bearing housing | Plastic carbon steel components |
| Sealing end cap | Plastic components |
| Sprocket small end cap | Plastic |
| Ball | Carbon steel |
| Roller surface | Steel/ Aluminum |
| Sprocket parameters | ||
| Sprocket | a1 | a3 |
| 08B14T | 18 | 22 |
| 1211 Selection parameter table | ||||||||||
| Tube diameter | Tube Thickness | Shaft Diameter | Maximum load | Bracket width | Sprocket | Shaft Length L | Material | Selection of the sample | ||
| D | t | d | BF | (Female thread) | Steel galvanized | Stainless Steel | Aluminum | OD50mm Shaft dia12mm | ||
| Φ50 | 1.5 | Φ12/15 | 150KG | W+42 | 08B41T | W+42 | ✓ | ✓ | ✓ | Stainless steel 201, Female thread |
| Φ60 | 2.0 | Φ/12/15 | 160KG | W+42 | 08B41T | W+42 | ✓ | ✓ | ✓ | 1211.50.12.800.B0.10 |
Remarks: The p50 pipe can be covered with 2mm PVC soft rubber; the medium 50 pipe can be equipped with a tapered sleeve for turning conveying.
| Sprocket parameters | ||
| Sprocket | a1 | a3 |
| 08B14T | 18 | 18.5 |
| 1212 Selection parameter table | ||||||||||
| Tube diameter | Tube Thickness | Shaft Diameter | Maximum load | Bracket width | Sprocket | Shaft Length L | Material | Selection of the sample | ||
| D | t | d | BF | (Female thread) | Steel galvanized | Stainless Steel | Aluminum | OD50mm Shaft dia12mm | ||
| Tube Length800mm | ||||||||||
| Φ50 | 1.5 | Φ12/15 | 150KG | W+64 | 08B41T | W+64 | ✓ | ✓ | ✓ | Stainless steel 201, Female thread |
| Φ60 | 2.0 | Φ/12/15 | 160KG | W+64 | 08B41T | W+64 | ✓ | ✓ | ✓ | 1212.50.12.800.B0.10 |